|CONSTRUCTION:||Oil Mist Filter||MEDIA MATERIAL:||FIBERGLASS|
oil mist eliminator filter,
oil separator filter element
This replacement element for your oil mist eliminator is manufactured with a seamless housing and no welds to rust or vibrate apart.
This element can be easily replaced with a thumbscrew.
Recommended Change: 4-6 Months (depending on usage and environment conditions)
Air oil separator filter is the key to the quality of compressed air in air compressor. The compressed air from the compressor head noses carries oil droplets of various sizes,the big oil droplets are easy to be separated by the separation tank,and the small ones(suspension) must be filtered through micron fiberglass media of air oil separator filter.
To chose the correct diameter and thickness of fiberglass is one of the most important factors to ensure the filtration effect.
The small oil droplets quickly aggregate into large ones after the intercept, spread and aggregate of filter media,then settlement in the bottom of the filter via the influence of pneumatic and gravity. The oil returns to the lubrication system continuously from the return pipe inlet at the bottom recess of filter element,allowing the compressor discharging purer,higher quality compressed air.
Reinforced with epoxy coated steel wire
Metal mesh support on both sides of media.
0.3 micron media,99.97% efficiency
Continuous operating temperature: <80℃
High efficiency at low pressure drop;
Increased surface area in a given volumn allows for low velocity separation of ultra-fine oil mists
Low oil carryover
|Part Number||SCFM Rating||ID||OD||HT|
Galvanized diamond mesh
Open / closed with bolt hole
NO MOQ . But advice full container to save cost.
Around 10 days
T/T in advance ; West Union ; Paypal
By sea to your nearest port
Around 1000 pcs per week
1. Q:Are you a factory or trading company?
A:We are a factory
2. Q:Where is your factory located? How can I visit there?
A:Our factory is located in Zhangjiagang City, Jiangsu Province, China, about 1.5 hours from Shanghai and
40 minutes from Wuxi Dong station by car. All our clients, from home or abroad, are warmly welcome to visit us!
3. Q:How can I get some samples?
A: We are honored to offer you samples.
4. Q:How does your factory do regarding quality control?
A:Quality is priority. Filterk people always attach great importance to quality controlling from the very beginning
to the very end. Our factory has gained ISO9001:2008 authentication.
We are your best choice!
Contact Person: ella